Shifter A/T: Service and Repair

Transmission Selector Lever

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Place the range selector lever in the D5 position.
3. Remove the center console.
4. Remove the components in the order indicated in the illustration and table.








5. To install, reverse the removal procedure.

Item 1: Transmission Selector Lever Handle Removal Note





1. Remove the handle and cover.
1 Slide the cover down.
2 Remove the two screws.
3 Remove the handle and the cover.

Item 2: Transmission Selector Lever Bezel Removal Note





1. Remove the shifter bezel out of the way.





2. Remove the PRNDL indicator bulb.

Item 3: Transmission Brake Shift Interlock Actuator Removal Note





1. Disconnect the cable from the lever.
1 Remove the shift interlock cable from the bracket.
2 Disconnect the cable from the lever.