Oil Cooler: Service and Repair

Oil Cooler

Removal and Installation
1. With the vehicle in NEUTRAL, position on a hoist.
2. Drain the engine cooling system.
3. Remove the LH exhaust manifold.
4. Remove the components in the order indicated in the illustration and table.





5. To install, reverse the removal procedure.
6. Fill and bleed the engine cooling system.

Items 2 and 3: Oil Cooler Bolt and Oil Cooler Installation Note





1. Install the oil cooler and bolt finger-tight. Rotate the oil cooler clockwise until the locating pin hits the stop. Tighten the bolt to specification.