Lighting Control Module (LCM)

REMOVAL
1. Disconnect the battery ground cable.

CAUTION: Prior to removal of module, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed.







2. Remove the LH instrument panel lower insulator.
1 Remove the pin-type retainers.
2 Disconnect the courtesy lamp.
3 Remove the LH instrument panel insulator.
3. Remove the accelerator pedal and shaft.







4. Position the LCM aside.
1 Remove the screws.
2 Release the locking tab.
3 Position the LCM aside.







5. Remove the LCM.
1 Disconnect the electrical connectors.
2 Remove the LCM.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.