Front Door Panel: Service and Repair

REMOVAL

NOTE: LH side shown, RH side similar.







1. Remove the window switch bezel.







2. Disconnect the electrical connectors.







3. Remove the screws.

NOTE: Use care not to damage the trim panel when removing the screws.


4. Remove the handle.







5. Remove the screws.







6. Remove the front door trim panel.







7. Disconnect the electrical connectors.







8. Remove the retainer clips from the bracket.

NOTE: When attaching the front door trim panel, attach the color-coded pull-strap retainer clips to the front door trim panel. The green retainer clip goes toward the front of the vehicle. The black retainer clip goes toward the rear of the vehicle.

INSTALLATION
1. To install, reverse the removal procedures.