Fuel Injector: Service and Repair

REMOVAL

WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

1. Remove the fuel injection supply manifold.







2. Remove the retaining clip and the fuel injectors from the fuel injection supply manifold.







3. Remove and discard the two O-ring seals from each fuel injector.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Install new O-ring seals.

NOTE: Lubricate new fuel injector O-ring seals with clean engine oil.