Part 2

Transmission Con't





30. CAUTION: Servo cover is under spring tension.

Using the special tool, remove the intermediate servo cover retaining ring and cover.





31. Remove the intermediate band servo piston and spring.





32. CAUTION: Servo cover is under spring tension.

Using the special tool, remove the overdrive servo cover retaining ring and cover.





33. Remove the front band servo piston and spring.





34. Remove the screw.





35. NOTE: Tag and identify parts for reassembly.

Compress the overdrive band and remove the apply strut.





36. Remove the overdrive band.





37. Remove the overdrive brake and coast clutch drum.





38. CAUTION: Do not bend trigger wheel.

NOTE: The No. 2 thrust bearing is in this assembly.

Remove the planetary gear overdrive carrier.





39. Remove the overdrive planet thrust bearing (No. 2).





40. Remove the overdrive ring gear, overdrive one-way clutch assembly, and center shaft as an assembly.





41. NOTE: Tag and identify the center shaft thrust bearing (No. 3) for assembly.

Remove the No. 3 center shaft thrust bearing.





42. CAUTION: The center support locknut could fall into the remaining assembly if not removed.

Remove the screw.





43. Remove the locknut and cage.





44. Remove the center support retaining ring.






45. NOTE: When removing the center support, pull evenly around the center support web.

Remove the center support.





46. NOTE: Tag and identify the No. 4 intermediate brake drum thrust bearing.

Remove the intermediate brake drum thrust bearing (No. 4).





47. Remove the intermediate band anchor strut.





48. CAUTION: Identify the anchor and apply ends of the intermediate band.

Remove the intermediate band.





49. Remove the intermediate band apply strut.





50. Remove the screw.





51. NOTE: The No. 5 forward clutch cylinder thrust bearing may come out with the intermediate brake and direct clutch drum.

Remove the direct clutch drum.





52. Remove the No. 5 forward clutch cylinder thrust bearing, tag and identify.





53. NOTE: The No. 6A thrust bearing may come out with the cylinder. Tag for reassembly.

Remove the forward clutch cylinder.





54. NOTE: The No. 6A forward ring gear hub thrust bearing may have come out with the forward clutch cylinder.

Remove the No. 6A forward ring gear hub thrust bearing.





55. NOTE: The No. 7 forward planet thrust bearing may come out with the forward ring gear and hub assembly.

Remove the forward ring gear and hub as an assembly.





56. Remove the No. 6B forward clutch thrust washer from the forward ring gear hub.





57. NOTE: The No. 7 forward planet thrust bearing may come out with the forward ring gear and hub assembly.

Remove the No. 7 forward planet thrust bearing.