Torque

Torque Specifications

Torque Specifications (1 Of 5):

Torque Specifications (2 Of 5):

Torque Specifications (3 Of 5):

Torque Specifications (4 Of 5):

Torque Specifications (5 Of 5):

Cylinder Head Torque Specifications

LH SIDE

CAUTION: New cylinder head bolts must be installed. They are tighten-to-yield design and cannot be reused.

NOTE: LH and RH cylinder head gaskets are not interchangeable.

Using a new cylinder head gasket and bolts, install the LH cylinder head and loosely install the bolts.

Cylinder Head Bolt Torque Sequence:

Tighten the bolts in six stages in the sequence shown:

- Stage 1: Tighten to 30 Nm (22 ft. lbs.).
- Stage 2: Rotate 90°.
- Stage 3: Back out a minimum of one full turn (360°).
- Stage 4: Tighten to 30 Nm (22 ft. lbs.).
- Stage 5: Rotate 90°.
- Stage 6: Rotate all bolts an additional 90°.

RH SIDE

CAUTION: The cylinder head bolts must be replaced with new bolts. They are tighten-to-yield designed and cannot be reused.

NOTE: LH and RH cylinder head gaskets are not interchangeable.

Using a new cylinder head gasket and bolts, install the RH cylinder head and loosely install the bolts.