EGR Electronic Vacuum Regulator Solenoid: Service and Repair

REMOVAL
1. Remove the cowl vent screen.







2. Push on the RH corner of the filter to release the clip. Release the LH clip and remove the cabin air filter.







3. Remove the seven bolts and remove the cross-vehicle support.







4. Remove the bolts.







5. Remove the cabin air filter housing by lifting the outboard side then removing the housing.







6. Remove the three bolts and remove the plenum panel.







7. Disconnect the EGR vacuum regulator solenoid.
^ Disconnect the electrical connector.
^ Disconnect the vacuum hoses.







8. Remove the EGR vacuum regulator solenoid.
^ Remove the bolts.

INSTALLATION
1. To install, reverse the removal procedure.