Cylinder Heads
Cylinder HeadSpecial Tools:
Special Tool(s)
Disassembly and Assembly
1. Using the special tool, remove the valve spring retainer key.
2. Remove the valve spring.
- Remove the retainer.
- Remove the spring.
3. For component tests of the valve spring retainer, refer to valve spring retainer.
4. Remove the valve stem seal.
5. Remove the valve.
6. Repeat the procedure until all of the valves are removed.
7. To assemble, reverse the disassembly procedure.
- Lubricate the valve stem and the valve stem seal with clean engine oil.