Lateral Accelerometer: Service and Repair

ANTI-LOCK CONTROL-TRACTION CONTROL AND STABILITY ASSIST

Accelerometer

Removal

NOTE: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Principles of Operation. [1][2]Description and Operation

1. Remove the floor console.





2. Remove the console A/C duct.





3. Disconnect the lateral accelerometer electrical connector.





4. Remove the lateral accelerometer.
1 Remove the lateral accelerometer bolts.
2 Remove the lateral accelerometer.

Installation

NOTE: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Principles of Operation. The accelerometer is positioned with the connector pointed to the left side of the vehicle. Be sure to mount the accelerometer in this orientation during the installation procedure.





1. To install, reverse the removal procedure.