Roof Opening Panel Assembly

REMOVAL
1. Remove the headliner.







2. Remove the roof opening panel assembly.
1 Disconnect the drain tubes.
2 Remove the bolts.
3 Remove the bolts.

NOTE: Support the roof opening panel assembly to prevent the unit from dropping.

INSTALLATION

NOTE: The roof opening panel is available as an assembly or a track and rail assembly. The track and rail assembly must have the roof opening glass and the roof opening panel opening shield transferred from the old unit. The roof opening panel assembly can be installed without transferring parts from the old unit.

1. If necessary, transfer the roof opening glass assembly and the roof opening panel opening shield to the new roof opening panel assembly.







2. Install and support the roof opening panel assembly in the vehicle.
^ Make sure the alignment pins are correctly seated on each side.







3. Install the roof opening panel assembly bolts.







4. Connect the drain tubes.
5. Install the headliner.
6. Adjust the roof opening glass height.