Manual Transmission

EGO Sensor Wrench:

SPECIAL TOOL(S)

REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.

Rear 3.0L M/T:

3. Remove the Heated Oxygen Sensors (HO2S).
1 Disconnect the electrical connector.
2 Using the special tool, remove the HO2S.

NOTE: LH shown, RH similar.

INSTALLATION
1. To install, reverse the removal procedure.
^ Apply a light coat of High Temperature Nickel Anti-Seize Lubricant F6AZ-9LA94-AA or equivalent meeting Ford specification ESE-M12A4-A to the threads of the heated oxygen sensors.