Glass-Roof Opening Panel Assembly

REMOVAL
1. Operate the roof opening glass assembly to the closed position.







2. Remove the roof opening glass assembly.
1 Swing the left and right sight shields rearward.
2 Remove the four screws.
3 From the exterior of the vehicle, lift the roof opening glass assembly from the vehicle.
3. Remove the roof opening glass seal.

INSTALLATION







1. Install the roof opening glass seal.
^ Position the roof opening glass seal seam in the center of the passenger side of the roof opening glass.







2. Install the roof opening glass assembly.
1 Install the roof opening glass assembly in place aligning screw holes.
2 Install the four screws.
3 Swing the left and right sight shields forward and snap into place.

NOTE: Make sure to carefully align the sight shield to the snap retainer prior to positioning into place.

3. Adjust the roof opening glass height.