Shifter A/T: Service and Repair

Removal and Installation
1. Remove the center console.





2. Remove the handle and the cover.
1 Slide the cover down.
2 Remove the two screws.
3 Remove the handle and the cover.





3. Remove the shift bezel.





4. Remove the PRNDL indicator bulb.





5. Remove the rear A/C air duct.





6. Disconnect the cable from the lever.
1 Remove the shift interlock cable from the bracket.
2 Disconnect the cable from the lever.
7. Raise and support the vehicle.





8. Disconnect the transmission shift cable from the selector lever.
9. Lower the vehicle.





10. Remove the shifter assembly.
- Remove the bolts.
- Remove the shifter assembly.

11. Note: A cable adjustment must be preformed after the installation procedure.

To install, reverse the removal procedure.