Front

REMOVAL





1. Disconnect the battery ground cable.
2. Raise and support vehicle.
3. Remove the inner splash shield.





4. Disconnect the front anti-lock brake sensor electrical connector.





5. Remove the harness from the clips.





6. Remove the front anti-lock brake sensor.
1 Remove the bolt.
2 Remove the front brake anti-lock sensor.

INSTALLATION





1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.