Tire Pressure Module: Service and Repair

REMOVAL







1. Disconnect the battery ground cable.







2. Disengage and lower the console panel finish panel.







3. Remove the low tire pressure module.
1. Disconnect the electrical connector.
2. Remove the screws.
3. Remove the module.

CAUTI0N: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

INSTALLATION

1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.