Shift Solenoids 1 and 2

Chart #701:

DESCRIPTION
Two ON/OFF shift solenoids are used for electronic shift scheduling. One unit containing the two shift solenoids is located in the main control valve body. The shift solenoids are two-way, normally closed style. Shift solenoids (SS-1 and SS-2) provide gear selection of first through fourth gears by controlling the pressure to the three shift valves.

SS-1
Symptoms:
Improper gear selection depending on failure mode and manual lever position.
- Failed ON - first and fourth gear only.
- Failed OFF - second and third gear only.
DTCs:
P0750*, P0751**, P0781**, P0782**, P0783**, P1751, P1714

SS-2
Symptoms:
Improper gear selection depending on failure mode and manual lever position.
- Failed ON - third and fourth gear only.
- Failed OFF - first and second gear only.
DTCs:
P0755*, P0756**, P0782**, P0783**, P1756, P1715

SS-1 and SS-2
Symptoms:
- Both failed ON - fourth gear only.
- Both failed OFF - second gear only.
DTCs:
P0750*, P0751, P0755*, P0756

* Output circuit check, generated only by electrical conditions.
** May also be generated by some non-electrical transmission component condition.