Rear Door Window Regulator: Service and Repair
RemovalRear Door Window Mechanism:
1. Remove door trim panel and watershield. Doors
2. Prop rear door window glass to align channel holes.
3. Remove four rivets attaching regulator mounting plate assembly to door inner panel.
4. Disconnect power wiring connector lift.
NOTE: Use access hole in door inner panel for removal/installation.
5. Remove window regulator and glass channel from door.
Installation
1. Install window regulator through the access hole in the rear door and slide regulator arm plastic guides into glass bracket C-channel and equalizer bracket.
2. Install rivets (385189-S100) using Heavy Duty Riveter D80L-23200-A or equivalent, or 1/4-20 x 1/2-inch screw and washer assemblies and 1/4-20 nut and washer assemblies to secure regulator mounting plate and glass channel to door inner panel.
NOTE: Equivalent metric retainers may be used.
3. Cycle rear door window glass to ensure smooth operation.
4. Install watershield and door trim panel.