Ignition Coil Bracket

REMOVAL
1. Remove ignition coils.
2. If equipped, remove secondary air injection diverter valve and bracket from LH ignition coil mounting bracket stud bolts.
3. Remove ignition coil mounting bracket stud bolts and ignition coil mounting bracket from LH cylinder head.

INSTALLATION
1. To install, reverse Removal procedure.
2. Tighten ignition coil mounting bracket to LH cylinder head stud bolts to 20-30 Nm (15-22 ft lb). Tighten retaining nuts for secondary air injection diverter valve and bracket to 20-30 Nm (15-22 ft lb), if equipped.