EGR Tube: Service and Repair

EGR Valve To Exhaust Manifold Tube:

REMOVAL
^ Partially raise vehicle on hoist.
^ Remove LH front tire and wheel assembly.
^ Disconnect EGR valve to exhaust manifold tube from EGR valve tube to manifold connector with a 22 mm crowfoot wrench.
^ Remove EGR valve tube to manifold connector from exhaust manifold.
^ Lower vehicle.
^ Disconnect EGR back-pressure transducer hoses from EGR valve to exhaust manifold tube.
^ With a 22 mm crowfoot wrench, disconnect EGR valve to exhaust manifold tube from EGR valve and remove EGR valve to exhaust manifold tube from vehicle.

INSTALLATION
^ To install, reverse removal procedures. Tighten EGR valve tube to manifold connector to exhaust manifold to 45-65 Nm (33-48 ft lb). Tighten EGR valve to exhaust manifold tube nuts to 40-45 Nm (30-33 ft lb). Tighten lug nuts to 115-142 Nm (85-105 ft lb).