Five Passenger Vehicles

REMOVAL






1. Close cup holders.
2. Remove console glove compartment and glove compartment door by removing two screws under hinge. Pull glove compartment out of console.
3. Remove console front finish panel using a small screwdriver.
4. Remove console panel by unsnapping it from the console.
5. Remove console to bracket retaining screws through glove compartment opening.
6. Remove console base.

NOTE: While lifting console base out, it may be necessary to disconnect wiring connector to the gearshift lever.

7. Remove two console to instrument panel screws.

INSTALLATION
1. To install, reverse Removal procedure.
2. Tighten all screws to 1-2 Nm (9-18 in lbs).