JB5 Check Wiring Harness (Door Open Test)

^ Since the air suspension control module has received the signal that all doors a determine which door or doors the air suspension control module did not receive an OPEN door signal from. In order to do this the following action is required.

^ Open one of the vehicle doors and leave it open.

^ Are air compressor and vent solenoid valve cycling together?

YES -- This door circuit is operating properly. Close this door and REPEAT step JB5 until all vehicle doors have been checked.

NO -- Air suspension control module has not received signal that door was Open. Record location of this door and REPEAT Step JB5 until all doors have been checked. Then GO to JB6.