Ride Height

Note: All doors must be closed when adjusting ride height.

Suspension Ride Height:

Fig. 18 Front Suspension Ride Height Adjustment:

Front Suspension


The front suspension ride height or ``C'' dimension, Fig. 17, is adjusted by moving the front left and/or right lower sensor attaching stud to one of the three adjustment positions as shown, Fig. 18. Loosen the attaching screw and adjust up or down as required. Changing the sensor attachment point one position will result in a .50 inch change in the ``C'' dimension. The ``C'' dimension should be indicated at .24 inches.

Rear Suspension

Fig. 19 Rear Suspension Ride Height Adjustment:

The rear suspension ride height or ``D'' dimension, Fig. 17, is adjusted by moving the rear sensor attaching bracket up or down in relation to the right rear upper control arm, Fig. 19. Loosen the attaching nut and position up or down as required. A change to the sensor attaching point by one index mark will result in a .250 inch change to the ``D'' dimension. The ``D'' dimension should be indicated at 5.06 inches.