System Deactivation Procedures

To Deactivate System:
1. Disconnect battery ground cable and backup power supply.
2. Remove four nut and washer assemblies retaining driver air bag module to steering wheel.
3. Disconnect driver air bag module connector
4. Open glove compartment and rotate all the way down, past the stops.
5. Disconnect passenger air bag connector.





6. Attach jumper wire to air bag terminals on clockspring assembly.
7. Attach jumper wire to air bag terminals on the wiring harness side of passenger air bag module connector.

WARNING: IF VEHICLE IS EQUIPPED WITH OPTIONAL PASSENGER AIR BAG, BOTH DRIVER AND PASSENGER AIR BAG MODULES MUST BE DISCONNECTED.









8. Connect backup power supply battery ground cable.