Back Window - Lower Moulding Cover Rattles

TRIM - INTERIOR - LOWER MOULDING Article No.
COVER RATTLES 87-10-5

LINCOLN-MERCURY: 1987-88 LINCOLN TOWN CAR

ISSUE: A rattle from the lower back window area may be caused by the lower moulding cover assembly being loose on the back window interior moulding, This cover assembly is behind the high mount brakelamp.

ACTION: To correct this, install a strip of vinyl foam tape on the inside of the lower moulding cover assembly using the following service procedure.

1. Remove the high mount brakelamp as shown in Section 32-10 of the 1987 Car Shop Manual.

Figure 3 - Article 87-10-5:

2. Remove lower moulding cover assembly and apply a strip of vinyl foam tape (C6AZ-19627-A) to back of cover assembly, Figure 3, View C.


3. Reinstall lower moulding cover assembly onto back window moulding.

4. Reinstall high mount brakelamp.

PART NUMBER PART NAME CLASS

C6AZ-19627-A Vinyl Foam Tape AM

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP871005A
TIME: 0.4 Hr.
DLR. CODING: Basic Part No. 70423A74
Code: 85