Removal

L110F HYBRID TRANSMISSION / TRANSAXLE: OIL PUMP RELAY: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER LH Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE ENGINE ROOM SIDE COVER RH Removal

5. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER ASSEMBLY RH Removal

7. REMOVE NO. 1 INVERTER RESERVOIR BRACKET Removal

8. REMOVE POWER STEERING ECU Removal

9. REMOVE OIL PUMP RELAY

(a) Remove the relay box cover.





(b) Remove the oil pump relay from the relay block.