Installation

PARKING BRAKE: ELECTRIC PARKING BRAKE SWITCH: INSTALLATION

1. INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

(a) Install the bracket to the No. 1 instrument panel safety pad with the 2 screws.





(b) Install the electric parking brake switch to the No. 1 instrument panel safety pad.

(c) Install the screw.





2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

3. INSTALL SWITCH BASE HOLE COVER





(a) Install the screw.

(b) Attach the claw to install the cover.

4. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING Installation

5. INSTALL INSTRUMENT SIDE PANEL LH Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL BATTERY SERVICE HOLE COVER LH Installation

8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

10. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.