Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Lexus >> 2012 >> CT 200h L4-1.8L (2ZR-FXE) Hybrid >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt >> Service and Repair >> Removal and Replacement >> Rear Seat Inner Belt Assembly >> Installation

Installation





SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: INSTALLATION

1. INSTALL REAR SEAT INNER BELT ASSEMBLY (w/o Seat Heater System)

(a) Install the rear seat inner belt assembly with the bolt.





Text in Illustration





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
* Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.
* Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.

2. INSTALL REAR SEAT INNER BELT ASSEMBLY (w/ Seat Heater System)

(a) Install the rear seat inner belt assembly with the bolt.





Text in Illustration





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
* Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.
* Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.

(b) Engage the 2 clamps.

(c) Connect the connector.

3. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/o Seat Heater System)

(a) Install the rear seat inner with center belt assembly LH with the bolt.





Text in Illustration





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
* Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.
* Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.

4. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/ Seat Heater System)

(a) Install the rear seat inner with center belt assembly LH with the bolt.





Text in Illustration





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
* Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.
* Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of floor panel.

(b) Engage the 2 clamps.

(c) Connect the 2 connectors.

5. INSTALL REAR SEAT CUSHION LOCK HOOK Installation

6. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
pro multis · About Operation CHARM