Disassembly

INTERIOR PANELS / TRIM: ROOF HEADLINING: DISASSEMBLY

1. REMOVE VANITY LIGHT ASSEMBLY

(a) Remove the vanity light assembly Removal.

HINT
Use the same procedure for the other vanity light.

2. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY Removal

3. REMOVE NO. 1 ROOF WIRE

(a) Remove the adhesive tape from the roof headlining assembly.





Text in Illustration





(b) Turn the visor connectors counterclockwise approximately 90° and separate the connectors and each clamp from the roof headlining assembly.

(c) Remove the No. 1 roof wire from the roof headlining assembly.





Text in Illustration





4. REMOVE FRONT SIDE RAIL SPACER RH

(a) Remove the front side rail spacer RH from the roof headlining assembly.





Text in Illustration





5. REMOVE FRONT SIDE RAIL SPACER LH

HINT
Use the same procedure described for the RH side.

6. REMOVE NO. 2 ROOF HEADLINING SET PLATE RH (w/o Sliding Roof)

(a) Remove the No. 2 roof headlining set plate RH from the roof headlining assembly.





7. REMOVE NO. 2 ROOF HEADLINING SET PLATE LH (w/o Sliding Roof)

HINT
Use the same procedure described for the RH side.

8. REMOVE ROOF HEADLINING PAD

(a) Remove the roof headlining pad from the roof headlining assembly.





Text in Illustration





9. REMOVE NO. 2 ROOF HEADLINING PAD

HINT
Use the same procedure described for the roof headlining pad.

10. REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)

(a) Remove the No. 1 roof silencer pad from the roof headlining assembly.





11. REMOVE NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)

(a) Remove the No. 3 roof silencer pad from the roof headlining assembly.





12. REMOVE NO. 4 ROOF SILENCER PAD (w/o Sliding Roof)

(a) Remove the No. 4 roof silencer pad from the roof headlining assembly.





13. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

(a) Remove the 2 No. 2 roof silencer pads from the roof headlining assembly.





14. REMOVE NO. 2 ROOF SILENCER PAD (w/ Sliding Roof)

(a) Remove the No. 2 roof silencer pad from the roof headlining assembly.