Installation

EXTERIOR PANELS / TRIM: NAME PLATE: INSTALLATION

HINT
When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature





NOTICE:
Do not heat the vehicle body, name plates or emblem excessively.

1. INSTALL SYMBOL EMBLEM

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the symbol emblem. (If reusing the symbol emblem)

(1) Using a heat light, heat the symbol emblem.

(2) Remove the double-sided tape from the symbol emblem.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the symbol emblem.

(c) Install the symbol emblem.

(1) Using a heat light, heat the vehicle body and symbol emblem.

(2) Remove the release paper from the symbol emblem.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the symbol emblem.





Text in Illustration





2. INSTALL NO. 1 BACK DOOR NAME PLATE (w/ Brand Name Plate)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 1 back door name plate. (If reusing the No. 1 back door name plate)

(1) Using a heat light, heat the No. 1 back door name plate.

(2) Remove the double-sided tape from the No. 1 back door name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 1 back door name plate.

(c) Install the No. 1 back door name plate.

(1) Using a heat light, heat the vehicle body and No. 1 back door name plate.

(2) Remove the release paper from the No. 1 back door name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 1 back door name plate.





Text in Illustration





Reference Measurement:





3. INSTALL NO. 2 BACK DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 2 back door name plate. (If reusing the No. 2 back door name plate)

(1) Using a heat light, heat the No. 2 back door name plate.

(2) Remove the double-sided tape from the No. 2 back door name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 2 back door name plate.

(c) Install the No. 2 back door name plate.

(1) Using a heat light, heat the vehicle body and No. 2 back door name plate.

(2) Remove the release paper from the No. 2 back door name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 2 back door name plate.





Text in Illustration





Reference Measurement:





4. INSTALL BODY SIDE NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the body side name plate. (If reusing the body side name plate)

(1) Using a heat light, heat the body side name plate.

(2) Remove the double-sided tape from the body side name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the body side name plate.

(c) Install the body side name plates.

(1) Using a heat light, heat the vehicle body and body side name plate.

(2) Remove the release paper from the body side name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the body side name plate.





Text in Illustration





Reference Measurement:





HINT
Use the same procedure for the RH side and LH side.

5. INSTALL NO. 2 FRONT FENDER NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 2 front fender name plate. (If reusing the No. 2 front fender name plate)

(1) Using a heat light, heat the No. 2 front fender name plate.

(2) Remove the double-sided tape from the No. 2 front fender name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 2 front fender name plate.

(c) Install the No. 2 front fender name plate.

(1) Using a heat light, heat the vehicle body and No. 2 front fender name plate.

(2) Remove the release paper from the No. 2 front fender name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 2 front fender name plate.





Text in Illustration





Reference Measurement:





6. INSTALL NO. 1 FRONT FENDER NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 1 front fender name plate. (If reusing the No. 1 front fender name plate)

(1) Using a heat light, heat the No. 1 front fender name plate.

(2) Remove the double-sided tape from the No. 1 front fender name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 1 front fender name plate.

(c) Install the No. 1 front fender name plate.

(1) Using a heat light, heat the vehicle body and No. 1 front fender name plate.

(2) Remove the release paper from the No. 1 front fender name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 1 front fender name plate.





Text in Illustration





Reference Measurement: