Reassembly
EXTERIOR PANELS / TRIM: FRONT BUMPER: REASSEMBLY
1. INSTALL FRONT BUMPER SIDE SUPPORT LH
(a) Engage the clip, and install the front bumper side support LH as shown in the illustration.
(b) Install the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL FRONT BUMPER SIDE SUPPORT RH
HINT
Use the same procedure as for the LH side.
3. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH
(a) Engage the guide.
(b) Install the front side member bracket sub-assembly LH with the 4 bolts.
Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
4. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH
HINT
Use the same procedure as for the LH side.
5. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
(a) Install the front bumper reinforcement sub-assembly with the 6 bolts.
Torque : 34 Nm (347 kgf-cm, 25 ft-lbf)
(b) Engage the 4 clamps.
6. INSTALL FRONT BUMPER ENERGY ABSORBER
(a) Engage the 2 guides to install the front bumper energy absorber.
7. INSTALL FRONT BUMPER HOLE COVER LH
(a) Engage the hook.
Text in Illustration
(b) Engage the 2 claws and install the front bumper hole cover LH.
8. INSTALL FRONT BUMPER HOLE COVER RH
HINT
Use the same procedure as for the LH side.
9. INSTALL NO. 1 LOWER RADIATOR GRILLE
(a) for Standard:
(1) Engage the 12 claws to install the No. 1 lower radiator grille.
(b) for Sport Package:
(1) Engage the 16 claws to install the No. 1 lower radiator grille.
10. INSTALL FRONT BUMPER EXTENSION LH
(a) for Standard:
(1) Engage the 5 claws to install the front bumper extension LH.
(b) for Sport Package:
(1) Engage the 4 claws to install the front bumper extension LH.
11. INSTALL FRONT BUMPER EXTENSION RH
HINT
Use the same procedure as for the LH side.
12. INSTALL FOG LIGHT MOUNTING BRACKET LH
(a) for Standard:
(1) Engage the claw and guide, to install the fog light mounting bracket LH as shown in the illustration.
(2) Install the 2 screws.
(b) for Sport Package:
(1) Install the 3 screws to install the fog light mounting bracket LH.
13. INSTALL FOG LIGHT MOUNTING BRACKET RH
HINT
Use the same procedure as for the LH side.
14. INSTALL FRONT FENDER LINER RETAINER
(a) Engage the 2 claws and install the 2 front fender liner retainers.
HINT
Use the same procedure for the RH side and LH side.
15. INSTALL RADIATOR GRILLE
(a) Engage the 6 claws to install the radiator grille.
(b) Install the 2 clips.
16. INSTALL SYMBOL EMBLEM (w/o Dynamic Radar Cruise Control System)
(a) Engage the claw.
(b) Install the symbol emblem with 2 new spring nuts.
17. INSTALL RADIATOR GRILLE EMBLEM (w/ Dynamic Radar Cruise Control System)
(a) Engage the claw.
(b) Install the radiator grille emblem with 2 new spring nuts.
18. INSTALL RADIATOR GRILLE MOULDING
(a) Engage the 8 claws to install the radiator grille moulding.
(b) Install the 2 screws.
19. INSTALL HOOD TO RADIATOR GRILLE SEAL
(a) Wipe off any tape adhesive residue with cleaner.
(b) Install the new hood to radiator grille seal with the 18 clips.
Text in Illustration
20. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET
(a) Install the front bumper extension mounting bracket with the 2 screws.
21. INSTALL NO. 3 ENGINE ROOM WIRE (w/ Wire Harness)
(a) Engage the 11 clamps to install the No. 3 engine room wire.
22. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation
23. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT
Use the same procedure as for the LH side.
24. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
Installation
HINT
Use the same procedure for the RH side and LH side.
25. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Installation
HINT
Use the same procedure for the RH side and LH side.
26. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
(a) Engage the 6 clamps to install the headlight cleaner hose.
27. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System) Installation
28. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
HINT
Use the same procedure as for the LH side.
29. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER (w/ Headlight Cleaner System) Installation