Removal

L110F HYBRID TRANSMISSION / TRANSAXLE: OIL PUMP RELAY: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER LH Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
* After the power switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. Therefore, after turning the power switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
4. REMOVE ENGINE ROOM SIDE COVER RH Removal

5. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER ASSEMBLY RH Removal

7. REMOVE NO. 1 INVERTER RESERVOIR BRACKET Removal

8. REMOVE POWER STEERING ECU Removal

9. REMOVE OIL PUMP RELAY

(a) Remove the relay box cover.





(b) Remove the oil pump relay from the relay block.