Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

2. REMOVE CONSOLE BOX

HINT
Refer to the instructions for Removal of the console box Removal.

3. REMOVE NO. 2 CONSOLE BOX DUCT Removal

4. REMOVE YAW RATE AND ACCELERATION SENSOR

(a) Separate the 2 wire harness clamps.





(b) Remove the 2 bolts and yaw rate and acceleration sensor.

(c) Disconnect the yaw rate and acceleration sensor connector.





NOTICE:
Do not remove the sensor from the bracket.