Installation

NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY: INSTALLATION

1. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY

2. INSTALL CLOCK ASSEMBLY Installation

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY

(a) Install the display and navigation module display assembly as shown in the illustration.





4. INSTALL NO. 2 RADIO BRACKET Installation

5. INSTALL NO. 1 RADIO BRACKET Installation

6. INSTALL HARD DISK DRIVE Installation

7. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

8. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

9. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

10. INSTALL FRONT ASH RECEPTACLE ASSEMBLY Installation

11. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

13. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

16. ADJUST CLOCK

17. INSPECT HARD DISK DRIVE

Operation Check