Oil Pump Relay

L110 HYBRID TRANSMISSION / TRANSAXLE: OIL PUMP RELAY: ON-VEHICLE INSPECTION

1. INSPECT OIL PUMP RELAY

(a) Remove the intake duct seal.

(b) Remove the side cover.

(c) Remove the engine room No. 1 relay block cover.

(d) Remove the relay from the engine room No. 1 relay block.

(e) Using an ohmmeter, measure the resistance between each terminal.





Standard resistance:





(e) If the result is not as specified, replace the relay.

(f) Install the relay to the engine room No. 1 relay block.

(g) Install the engine room No. 1 relay block cover.

(h) Install the side cover.

(i) Install the intake duct seal.