Replacement

AIR CONDITIONING: PRESSURE SWITCH: REPLACEMENT

REPLACEMENT

1. REMOVE FRONT BUMPER COVER
(a) Remove the front bumper cover Removal.





2. REMOVE PRESSURE SWITCH
(a) Disconnect the connector.
(b) Remove the switch.
(c) Remove the O-ring from the pressure switch.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.





3. INSTALL PRESSURE SWITCH
(a) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pressure switch.
Compressor oil:
ND-OIL 8 or equivalent
(b) Install the O-ring on the pressure switch.
(c) Install the switch.
Torque: 10.8 Nm (110 kgf-cm, 8ft-lbf)
(d) Connect the connector.
4. INSTALL FRONT BUMPER COVER
(a) Install the front bumper cover Installation.