Installation

PARKING BRAKE: ELECTRIC PARKING BRAKE SWITCH: INSTALLATION

INSTALLATION

1. INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

(a) Install the bracket to the No. 1 instrument panel safety pad with the 2 screws.
(b) Install the electric parking brake switch to the No. 1 instrument panel safety pad.

3. INSTALL SWITCH BASE HOLE COVER
(a) Install the screw.
(b) Attach the claw to install the cover.
4. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING Installation
5. INSTALL INSTRUMENT SIDE PANEL LH Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL BATTERY SERVICE HOLE COVER LH Installation
8. INSTALL BATTERY SERVICE HOLE COVER Installation
9. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation
11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.