Removal

HYBRID BATTERY CONTROL: HV RELAY ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE HV BATTERY
Removal
2. REMOVE NO. 1 HV BATTERY SHIELD SUB-ASSEMBLY Removal
3. REMOVE POWER STEERING CONVERTER WIRE Removal
4. REMOVE NO. 1 HV BATTERY COVER INTAKE DUCT Removal
5. REMOVE CONDENSER Removal
6. REMOVE UPPER HV BATTERY COVER SUB-ASSEMBLY Removal
7. REMOVE HYBRID VEHICLE CONVERTER Removal
8. REMOVE HV BATTERY TERMINAL BLOCK
CAUTION:
Wear insulated gloves.





(a) Remove the 3 nuts, bolt and HV battery terminal block.
9. REMOVE HV BATTERY JUNCTION BLOCK ASSEMBLY
CAUTION:
Wear insulated gloves.





(a) Disconnect the 5 connectors from the HV battery junction block assembly.
NOTICE:
Insulate the connectors of the removed high voltage wires with insulating tape.





(b) Remove the nut, 2 bolts and HV battery junction block assembly.
10. REMOVE ELECTRIC VEHICLE FUSE





(a) Remove the 4 bolts and 2 electric vehicle fuses.