Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: INSTALLATION

INSTALLATION

1. INSTALL NAVIGATION ECU





(a) Install the navigation ECU with the 4 screws.





(b) Connect the connectors.
2. INSTALL MULTI-DISPLAY ASSEMBLY Installation
3. INSTALL NO. 2 RADIO BRACKET Installation
4. INSTALL NO. 1 RADIO BRACKET Installation
5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation
6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation
7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
8. INSTALL FRONT ASH RECEPTACLE ASSEMBLY Installation
9. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation
10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation
11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation
12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
13. INSERT MAP DISC





(a) Remove the clock assembly.
(b) Turn the engine switch on (ACC).
(c) Insert the map disc.





(d) Check that the wire harness is in the position shown in the illustration.





(e) Engage the 2 clamps and install the clock assembly.
14. ADJUST CLOCK