Installation

EXTERIOR PANELS / TRIM: NAME PLATE: INSTALLATION

INSTALLATION
HINT: When installing the emblem and plate, heat the vehicle body, emblem and plate using a heat light.

Heating Temperature





NOTE:
Do not heat the vehicle body, emblem and plate excessively.

1. INSTALL NO. 2 FRONT FENDER NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the No. 2 front fender name plate (if reusing the No. 2 front fender name plate).
(1) Using a heat light, heat the No. 2 front fender name plate.
(2) Remove the double-sided tape from the No. 2 front fender name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the No. 2 front fender name plate.
(c) Install the No. 2 front fender name plate.
(1) Using a heat light, heat the vehicle body and No. 2 front fender name plate.
(2) Remove the peeling paper from the face of the No. 2 front fender name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 2 pins and install the No. 2 front fender name plate.





2. INSTALL NO. 1 FRONT FENDER NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the No. 1 front fender name plate (if reusing the No. 1 front fender name plate).
(1) Using a heat light, heat the No. 1 front fender name plate.
(2) Remove the double-sided tape from the No. 1 front fender name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the No. 1 front fender name plate.
(c) Install the No. 1 front fender name plate.
(1) Using a heat light, heat the vehicle body and No. 1 front fender name plate.
(2) Remove the peeling paper from the face of the No. 1 front fender name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 2 pins and install the No. 1 front fender name plate.





3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the No. 3 luggage compartment door plate (if reusing the No. 3 luggage compartment door plate).
(1) Using a heat light, heat the No. 3 luggage compartment door plate.
(2) Remove the double-sided tape from the No. 3 luggage compartment door plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the No. 3 luggage compartment door plate.
(c) Install the No. 3 luggage compartment door plate.
(1) Using a heat light, heat the vehicle body and No. 3 luggage compartment door plate.
(2) Remove the peeling paper from the face of the No. 3 luggage compartment door plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 2 pins and install the No. 3 luggage compartment door plate.





4. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the No. 1 luggage compartment door name plate (If reusing the No. 1 luggage compartment door name plate).
(1) Using a heat light, heat the No. 1 luggage compartment door name plate.
(2) Remove the double-sided tape from the No. 1 luggage compartment door name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the No. 1 luggage compartment door name plate.
(c) Install the No. 1 luggage compartment door name plate.
(1) Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.
(2) Remove the peeling paper from the face of the No. 1 luggage compartment door name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 2 pins and install the No. 1 luggage compartment door name plate.





5. INSTALL SYMBOL EMBLEM
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the symbol emblem (if reusing the symbol emblem).
(1) Using a heat light, heat the symbol emblem.
(2) Remove the double-sided tape from the symbol emblem.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the symbol emblem.
(c) Install the symbol emblem.
(1) Using a heat light, heat the vehicle body and symbol emblem.
(2) Remove the peeling paper from the face of the symbol emblem.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 2 pins and install the symbol emblem.