Installation

INTERIOR: REAR DOOR SUNSHADE ASSEMBLY: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.





1. INSTALL REAR CURTAIN SUB-ASSEMBLY LH
(a) Connect the connector and attach the 4 clips to install the curtain.
(b) Install the 10 screws.
2. INSTALL REAR NO. 2 DOOR FRAME GARNISH LH [1][2]Installation

3. INSTALL REAR DOOR FRAME GARNISH LH [1][2]Installation

4. INSTALL REAR DOOR TRIM COVER LH [1][2]Installation

5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Installation

6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH [1][2]Installation

7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL BATTERY SERVICE HOLE COVER LH Battery

10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY