Oil Pressure Sender: Testing and Inspection

2UR-FSE LUBRICATION: OIL PRESSURE SWITCH: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY
(a) Remove the No. 1 engine under cover Removal.
(b) Disconnect the oil pressure switch connector.






(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the oil pressure switch.
HINT: Put the engine in inspection mode Inspection Mode Procedure.

(d) Connect the oil pressure switch connector.
(e) Install the No. 1 engine under cover Installation.