Removal

CELLULAR COMMUNICATION: MAYDAY ECU: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal

5. REMOVE BATTERY SERVICE HOLE COVER

6. REMOVE ROPE HOOK ASSEMBLY

7. REMOVE ROPE HOOK

8. REMOVE DECK TRIM SIDE BOARD RH

9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

11. REMOVE REAR FLOOR FINISH PLATE

12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

13. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH







14. REMOVE MAYDAY ECU
(a) Disconnect the 4 connectors and 2 clamps.
(b) Remove the nut and ECU.






15. REMOVE MOBILEPHONE BRACKET
(a) Remove the 4 bolts and 2 mobilephone brackets.