Removal

HYBRID BATTERY CONTROL: HV RELAY ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE HV BATTERY
Removal
2. REMOVE NO. 1 HV BATTERY SHIELD SUB-ASSEMBLY Removal

3. REMOVE POWER STEERING CONVERTER WIRE Removal

4. REMOVE NO. 1 HV BATTERY COVER INTAKE DUCT Removal

5. REMOVE CONDENSER Removal

6. REMOVE UPPER HV BATTERY COVER SUB-ASSEMBLY Removal

7. REMOVE HYBRID VEHICLE CONVERTER Removal

8. REMOVE HV BATTERY TERMINAL BLOCK
CAUTION: Wear insulated gloves.





(a) Remove the 3 nuts, bolt and HV battery terminal block.
9. REMOVE HV BATTERY JUNCTION BLOCK ASSEMBLY
CAUTION: Wear insulated gloves.





(a) Disconnect the 5 connectors from the HV battery junction block assembly.
NOTE: Insulate the connectors of the removed high voltage wires with insulating tape.





(b) Remove the nut, 2 bolts and HV battery junction block assembly.
10. REMOVE ELECTRIC VEHICLE FUSE






(a) Remove the 4 bolts and 2 electric vehicle fuses.