Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ANTENNA: INSTALLATION

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ANTENNA: INSTALLATION

1. INSTALL FRONT TIRE PRESSURE ANTENNA RH






(a) Connect the connector.






(b) Install the front tire pressure antenna RH with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
HINT: Engage the tab into the hole as shown in the illustration to install the front tire pressure antenna RH.

2. INSTALL FRONT FENDER LINER RH
3. INSTALL ENGINE UNDER COVER
4. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
5. INSTALL REAR TIRE PRESSURE ANTENNA LH






(a) Install the rear tire pressure antenna LH with the 2 nuts.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)






(b) Install the grommet.






(c) Connect the connector.
6. INSTALL REAR FENDER LINER LH
7. INSTALL NO. 2 REAR FLOOR HOUSING SHIELD

8. INSTALL REAR WHEEL LH
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
9. INSTALL REAR SEATBACK ASSEMBLY Installation

10. INSTALL REAR SEAT HEADREST ASSEMBLY RH
11. INSTALL REAR SEAT HEADREST ASSEMBLY LH
12. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSPECT TIRE PRESSURE WARNING SYSTEM Test Mode Procedure.