Removal

2UR-GSE FUEL: FUEL PRESSURE REGULATOR: REMOVAL

2UR-GSE FUEL: FUEL PRESSURE REGULATOR: REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
(a) Discharge fuel system pressure Service Precautions.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

4. REMOVE NO. 3 ROOM PARTITION PAD Removal

5. REMOVE NO. 2 REAR FLOOR SERVICE HOLE COVER Removal

6. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Removal

7. REMOVE FUEL SENDER GAUGE ASSEMBLY Removal

8. SEPARATE FUEL SUCTION PLATE SUB-ASSEMBLY Disassembly

9. REMOVE FUEL FILTER Disassembly

10. REMOVE JET PUMP Disassembly

11. REMOVE FUEL PUMP HARNESS Disassembly

12. REMOVE NO. 1 FUEL SUCTION SUPPORT Disassembly

13. REMOVE FUEL PUMP ASSEMBLY Disassembly

14. REMOVE FUEL MAIN VALVE ASSEMBLY

(a) Remove the fuel main valve assembly from the fuel filter.

(b) Remove the 2 O-rings from the fuel main valve.
15. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

(a) Detach the 2 claws of the fuel filter and remove the cap.
(b) Remove the fuel pressure regulator assembly from the fuel filter.