Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY

(a) w/ Intuitive Parking Assist System:
(1) Engage the clamp and install the grommet.

(b) Engage the 4 claws and install the rear bumper assembly.

(d) Install the 2 rear bumper seal brackets.
(e) Install the 6 screws and 2 clips.

(f) w/ Intuitive Parking Assist System:
(1) Engage the No. 3 luggage room wire connector.
2. INSTALL NO. 1 REAR BUMPER PLATE

(a) Engage the 2 claws and install the No. 1 rear bumper plate.
HINT: Use the same procedure for the RH side and LH side.

3. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER LH (w/ Intuitive Parking Assist System) Installation

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) Installation

5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Intuitive Parking Assist System) Installation

6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) Installation

7. INSTALL ROPE HOOK (w/ Intuitive Parking Assist System) Installation

8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY (w/ Intuitive Parking Assist System) Installation

9. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER (w/ Intuitive Parking Assist System) Installation

10. INSTALL ROPE HOOK ASSEMBLY (w/ Intuitive Parking Assist System) Installation

11. INSTALL DECK SIDE TRIM BOX RH (w/ Intuitive Parking Assist System)
12. INSTALL DECK SIDE TRIM BOX LH (w/ Intuitive Parking Assist System)
13. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Intuitive Parking Assist System)