Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. PROBLEM SYMPTOM CONFIRMATION
-- SYMPTOM DOES NOT OCCUR (Go to step 4)
-- SYMPTOM OCCURS (Go to step 5)
4. SYMPTOM SIMULATION
NEXT -- Continue to next step.
5. CHECK FOR DTC
(a) Refer to DTC Check / Clear in the Navigation System Reading and Clearing Diagnostic Trouble Codes.
-- DTC IS OUTPUT (Go to step 9)
-- DTC IS NOT OUTPUT (Go to step 6)
6. CHECK IF THE SAME SYMPTOM APPEARS IN THE NAVIGATION SYSTEM
(a) Refer to Navigation System Problem Symptoms Table.
-- THE SYMPTOM APPEARS (FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING)
-- THE SYMPTOM DOES NOT APPEAR (Go to step 7)
7. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table Rear View Monitor System.
-- THE CORRESPONDING SYMPTOM EXISTS (Go to step 9)
-- THE CORRESPONDING SYMPTOM DOES NOT EXIST (Go to step 8)
8. CHECK THE ECU TERMINAL ARRANGEMENT BASED ON THE MALFUNCTION SYMPTOM
(a) Refer to Terminals of ECU Rear View Monitor System.
NEXT -- Continue to next step.
9. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
10. CONFIRMATION TEST
NEXT -- END