Installation

SUSPENSION CONTROL: ABSORBER CONTROL SWITCH: INSTALLATION

INSTALLATION

1. INSTALL ABSORBER CONTROL SWITCH
2. INSTALL CONSOLE BOX PLATE Installation

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

5. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation

6. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.