Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

INSTALLATION





1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Install the receiver with the bolt.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the receiver connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INITIALIZE SYSTEM
(a) Perform initialization Initialization.
NOTE: Be sure to inflate all tires (including the ground spare tire) to the proper inflation pressure before initialization.

5. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system Test Mode Procedure.